Contact Info
About Us
Place Order
Products
Stores / Dealers
Caribbean Division
MSDS/PDS Spray Equipment




Industrial Products List

Alkyd Metal Primers

Mo-Bar Universal Primer: [ MSDS Red & Gray -MSDS White / PDS ] A high quality, quick drying universal anticorrosive primer for use on properly prepared metal and over solvent sensitive coatings for high performance topcoats. Offers good exterior durability for shop primer use. Exhibits very good adhesion to properly prepared ferrous metals. Formulated for OEM use in exposures including mild industrial and marine environments.

Speed Prime: A fast drying shop coat primer for use on properly prepared steel. Offers excellent protection against corrosion in exposures including mild industrial and marine environments. Offers good exterior durability for short-term exposures during shipment, storage, and construction. (9-78)

Speed Prime HS: A heavy-duty, high-solids, zinc chromate anticorrosive primer for use on properly prepared ferrous metal. Offers good durability for shop primer use. High volume solids and low VOC content. Lead free.(28-DR-127, 28-DH-73, 28-DR-136, 28-DH-74)

Fast Dry Primer: Fast Dry Primer offers excellent protection against corrosion in exposures including mild industrial and marine environments. Exhibits very good adhesion to properly prepared ferrous metals. Offers good durability for shop primer use. Stocked in red, with special colors available with minimum order.

QD-58 Primer: A quick dry modified alkyd anticorrosive primer for use on properly prepared ferrous metal. QD Primer offers excellent protection against corrosion in exposures including mild industrial and marine environments. Very fast dry allows short recoat period. Provides a smooth surface for best appearance and performance of the coating system. (28-DH-75, 28-DR-134)

QD-78 Primer: Speed Prime 10 Low VOC Primer offers excellent protection against corrosion in exposures including mild industrial and marine environments. Exhibits very good adhesion to properly prepared ferrous metals. A durable shop primer that dries very fast to allow short recoat period. Regulatory compliant for reduced solvent emissions. Low viscosity for easy application.

Back To Top

 

Waterborne Metal Primers

Speed Prime Acrylic H2O Primer: This water reducible primer offers excellent protection in exposures including mild industrial and marine environments. Excellent adhesion, flexibility, blister resistance, block resistance, and early water resistance. Offers good durability when used as a shop primer. Low odor and VOC compliable.

Speed Prime Alkyd H2O Primer: Our Speed Prime Alkyd is a quick dry primer that offers excellent protection in exposures including mild industrial and marine environments. Excellent adhesion, flexibility, blister resistance, block resistance, and early water resistance. Offers good durability when used as a shop primer.

Back To Top

 

Alkyd Finishes

QD-520 Quick Dry Enamel: A high quality, quick drying, high gloss enamel for use on properly prepared ferrous metal. Quick dry enamel offers excellent protection in exposures including industrial and marine environments. Easy to apply, fast drying with good color and gloss retention. (520-series)

QD-521 High Solids Quick Dry Enamel: It is a high quality, quick drying, high gloss enamel for use on properly prepared ferrous metal. Quick dry enamel offers excellent protection in exposures including industrial and marine environments. Easy to apply, fast drying with good color and gloss retention. VOC compliant. (521-series)

Dry Fog Enamel: Spray Fog Dry Enamel offers excellent protection and appearance properties in exposures including mild industrial environments. Fast drying with good application properties. With proper application, the coating exhibits dry fog characteristics so that dry overspray can be swept up. Overspray will dry sufficiently in a fall of about 16 feet with proper application. Low VOC. (61-AW-6, 61-BW-2, 6-DW-58)

Back To Top

 

Acrylic Finishes

Quick Dry Acrylic Enamel: Acrylic Spraying Enamel offers excellent long term protection in exposures including mild industrial and marine environments. Excellent color and gloss retention and overall durability. When used with the recommended primers (28-DH-75, (28-DR-134), offers outstanding protection from corrosion and weathering. Provides and "automotive finish" look. (58-series)

Dynacryl Acrylic Enamel: A high quality, quick drying, high gloss acrylic enamel for use on properly prepared metal. This high solids acrylic spraying enamel offers excellent long-term protection in exposures to mild industrial and marine environments. Outstanding application qualities with very high gloss. Provides an automotive-like finish. Low VOC. (78-series)

Back To Top

 

Waterborne Finishes

Dynacryl H2O Acrylic Enamel: This water based acrylic spraying enamel offers excellent long term protection in exposures including mild industrial and marine environments. Excellent color and gloss retention and overall durability. When used with the proper primer, this product offers outstanding protection from corrosion and weathering. Very high gloss. (55-series)

Dynacryl H2O QD Enamel: This quick dry w/r enamel offers excellent protection in exposures including mild industrial and marine environments. Exhibits very good adhesion to properly prepared ferrous metals. Fast drying with good recoatability and water resistance. (54-series)

Acrylic Dry Fog Enamel: Acrylic Gloss Dry Fog offers excellent protection and appearance in exposures including mild industrial. Fast drying with good application properties. With proper application, the coating exhibits dry fog characteristics so that dry overspray can be swept up. Overspray will dry sufficiently in a fall of about 16 feet with proper application. Water based, low odor, low VOC. (55-AW-9)

Back To Top

 

Zinc Primers

Mo-Zinc 3 Inorganic Zinc Primer: Mo-Zinc 3 Zinc rich Primer offers excellent galvanic protection from corrosion exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to most organic solvents. Heat resistant to 750 degrees. (28-DH-50)

MoPoxY ZR Organic Epoxy Zinc Primer: MoPoxY ZR as a system in conjunction with the MoPoxY HB Epoxy and/or Polyurethane offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. (40-CM-4)

Back To Top

 

Epoxy Finishes

MoPoxY Polyamide/Epoxy: The MoPoxY epoxy coating system offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Convenient 1:1 mixing ratios. Heat resistant up to 200 degrees. (513-series)

MoPoxY HS Polyamide/ Epoxy: MoPoxY HS Coating is a high solids, low VOC coating offers excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Convenient 1:1 mixing ratios. Heat resistant up to 200 degrees. Convenient 1:1 mixing ratios. Heat resistant up to 250 degrees. Requires no induction time. (613-series)

MoPoxY HB High Build Epoxy Coating: This epoxy series offers excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. USDA approved for direct food contact surfaces and EPA approved for potable water tank lining. Meets AWWA d-102-78 inside system #1. (40-AW-13)

MoPox-Acryl Acrylic Epoxy Coating: Formulated for the marine industry as an alternative for hard-to-use polyurethane coatings. Excellent resistance to fresh and salt water. Low VOC at a ready to apply viscosity. Better application properties than 2-component polyurethanes. Good topcoat chemical resistance to areas subject to chemical splash, spills, and fumes. (41-AW-2)

MoPoxY Mastic Epoxy Coating: This mastic coating offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Very high solids. Low VOC. Heat resistant up to 200 degrees. (40-AW-32)

Back To Top

 

Polyurethane Finishes

Mothane Acrylic Polyurethane Enamel: Mothane Polyurethane Enamel offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 250 degrees. Excellent abrasion and moisture resistance.(72-series)

Mothane HD Acrylic Polyurethane Enamel: Our Mothane HD offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 250 degrees. Excellent abrasion and moisture resistance.(72-series)

Mothane HS-900 Acrylic Polyurethane Enamel: Mothane HS-900 offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 250 degrees. Excellent abrasion and moisture resistance.(72-series)

Mothane HS-1000 Acrylic Polyurethane Enamel: Our Mothane HS-1000 offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 250 degrees. Excellent abrasion and moisture resistance.(72-series)

Mirrorthane Polyester Polyurethane Enamel: This polyurethane enamel offers excellent long term protection in exposures including mild industrial and marine environments. Excellent color and gloss retention and overall durability. When used with the recommended primer, offers outstanding protection from corrosion and weathering. Provides a high gloss, mirror-like finish. (51-series)

Back To Top

 

Specialty Products

Heavy Duty Transportation Coatings (Truck, Railcar)
Heavy Duty Transportation Coatings (Truck, Railcar)
Heavy Equipment Coatings
Storage Tank Coatings (Exterior and Internal Linings)
Chemical Resistant Coatings
Temperature Resistant Coatings
OEM Coatings (Bake, Force Dry, Air Dry, High Solids, Water-based)
"Effect" Finishes (Hammer, Texture, Metallic)
Potable Water Tank Linings (NSF Approved)
Coal Tar Epoxy Coatings
Non-skid Epoxy Floor Coatings
Military/Federal Specification Coatings

Back To Top

 

Epoxy Primers / Intermediate Coatings

MoPoxY Epoxy Primer Red: The MoPoxY epoxy coating system offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Convenient 1:1 mixing ratios. Heat resistant up to 200 degrees. (513-10)

MoPoxY HS Epoxy Primer: MoPoxY HS Coating is a high solids, low VOC coating offers excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Convenient 1:1 mixing ratios. Heat resistant up to 200 degrees. Convenient 1:1 mixing ratios. Heat resistant up to 250 degrees. Requires no induction time. (613-10)

MoPoxY HB High Build Epoxy Primer: Offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 200 degrees. Excellent abrasion and moisture resistance. (40-DR-5)

MoPoxY ST Epoxy Coating: Excellent resistance to fresh and salt water. Excellent abrasion resistance, and adhesion to tight rust. Good adhesion to damp surfaces. A direct metal coating that does not require grit blasting. Provides recoatability with excellent adhesion over a long period of time. Heat resistant up to 200 degrees. (41-BK-1)

MoPoxY IR Epoxy Coating: Excellent resistance to fresh and salt water. Excellent abrasion resistance, and adhesion to tight rust. Good adhesion to damp surfaces. A direct metal coating that does not require grit blasting. Provides recoatability with excellent adhesion over a long period of time. Heat resistant up to 200 degrees. (41-BK-14)

MoPoxY Prime Reconstruction Primer: Excellent resistance to corrosion from fresh and salt water. May be topcoated with a variety of generic coating systems. An excellent weld through primer. Excellent spray application properties with a long pot life. Dry to recoat in minutes with very good thin film rust inhibitive properties. (40-DR-12)

Back To Top

 

Home Page